Alarms
transmission and reception
Fire? Breaking and entering? Flooding? You need a simple, reliable system to keep you informed at all times of such incidents that threaten your infrastructure. And if necessary, mobilize the right people to respond to these situations.
Swissdotnet develops and offers state-of-the-art, scalable alarm management systems tailored to these specific needs. All based on IP protocols and the Internet.
Alarms
transmission and reception
Fire? Breaking and entering? Flooding? You need a simple, reliable system to keep you informed at all times of such incidents that threaten your infrastructure. And if necessary, mobilize the right people to respond to these situations.
Swissdotnet develops and offers state-of-the-art, scalable alarm management systems tailored to these specific needs. All based on IP protocols and the Internet.
Solutions for every situation
Transmission by e-mail or SMS
Would you like a simple solution for transmitting fire or burglar alarms to a central receiving station while being automatically alerted?
Our transmitters are capable of transmitting the alarms of your choice to the people you want via SMS or e-mail.
Multi-site transmission
Is your company a national or international group with several sites?
The flexibility of our platform allows you to receive the alarms of your choice in your own control center, while entrusting the processing of others to private or public control centers.
This solution offers you a unified platform for managing all your alarms.
Levée de doute video
Some critical buildings require video verification. In the event of an alarm, our system is capable of broadcasting video to a central receiving station by separating the network infrastructure between the central station and the transmitter.
Swissdotnet’s video server can also be integrated into your infrastructure.
Transmission over IP
For its alarm systems, Swissdotnet uses open, standardized transmission protocols – like IP – enabling interoperability between different suppliers.
The use of this type of protocol opens up a wide range of possibilities for transmitting information, such as broadcasting video alarms, sending notifications by e-mail or SMS, or interfacing with other equipment.
Our devices
The alarm transmitter
The alarm transmitter, developed and produced in Switzerland by Swissdotnet, offers a scalable, secure solution in terms of both hardware and software. This is made possible by a mobile broadband transmission module (WWAN), dual transmission channels, encrypted communication and battery power. The device also enables remote maintenance and diagnostics.
The transmitter can also be connected to other technical equipment (PLCs, central detection units) to multiply alarm inputs.
Technical information
2 x 10/100M Ethernet ports
1 GPRS/3G or 4G module
12 alarm inputs
4 relay outputs for remote control
1 serial interface (RS-232/422/485)
2 12-24V power supply inputs
1 accessory 12V output
Transmission protocol ANSI/SIA DC-09-2007/2013 UDP/TCP or TS-50136-9
Our transmitter was developed by Swissdotnet and is produced in Switzerland.
Certifications :
EN 50131-10:2014 type Y
EN 50136-1:2013 DP2, DP4
EN 50136-2:2013
EN 54-21:2006 Type 1
The alarm receiver
Swissdotnet also develops its own receivers. In Switzerland, of course!
Like our transmission platform, our IP-based alarm receiving systems are scalable, open and meet demanding standards.
This modular, multi-protocol system meets the needs of private and public reception centers, as well as companies wishing to receive alarms internally.
Technical information
- Modular system makes it easy to add new protocols, applications or output interfaces
- Multiple IP receivers can be integrated into a group to spread the load and increase fault tolerance
- Configuration via HTML 5 interface for total infrastructure management by the customer
- Video stream reception, geolocation, diagnostic tools, availability statistics, automated backups and custom component/protocol integrations.
Reception protocols supported
ANSI/SIA DC-09-2007/2013 (UDP/TCP)
TS50136-9
EVALink / TUSNet
The alarm receiver
Swissdotnet also develops its own receivers. In Switzerland, of course!
Like our transmission platform, our IP-based alarm receiving systems are scalable, open and meet demanding standards.
This modular, multi-protocol system meets the needs of private and public reception centers, as well as companies wishing to receive alarms internally.
Technical information
- Modular system makes it easy to add new protocols, applications or output interfaces
- Multiple IP receivers can be integrated into a group to spread the load and increase fault tolerance
- Configuration via HTML 5 interface for total infrastructure management by the customer
- Video stream reception, geolocation, diagnostic tools, availability statistics, automated backups and custom component/protocol integrations.
Reception protocols supported
ANSI/SIA DC-09-2007/2013 (UDP/TCP)
TS50136-9
EVALink / TUSNet
The transmission box
Do you have your own transmitters and want to install them? With this in mind, Swissdotnet has developed a custom-built enclosure offering a high degree of modularity.
Numerous installation options are available, including :
– Mounting up to two transmitters
– Backup power supply EN54-4
– Backup power supply EN50131-6 Grade 2
– Slot for adding a coupler or PLC
